Features
- Open IoT MQTT over layer
- Native Three bands implementation (433, 868 and 915Mhz)
- Wide-area coverage: over 10km² line-of-sight (LOS)
- Datalogging and buffering in case of Network loss
- Routing table for up to 1000 devices
- Ethernet connectivity: RJ45, 10Base-T, or 100Base-TX
- AC adapter: 100-240V AC 50/60Hz to 5-12V DC 0.2A
- Low power consumption to fit alternative powering like solar panels
- Low cost for mass deployment
- Full 2 way communications
- Secured by SSL and AES 128
- Failure and status messages (NTP synchro status, Buffering status…)
- Time stamped buffering
- DHCP and fix IP capabilities
- NTP time synchronization
- Advanced firmware update mechanism
- Embedded configuration web server
- Fully certified CE & EN 300-220 & FCC 15-247
Physical description
- 135x85x40mm
- 200g
- ABS plastic casing with IP44 protection for indoor use
- Operating conditions: -20°C to +60°C, 0 to 90% RH, non-condensing
Options
- POE interface
- Outdoor antenna
- I/O interface
INS-Extender and INS-Repeater
Relay the data and support the INS-Master
Features
- Multi-band 433MHz, 868MHz, 915MHz
- Wide-area coverage: over 10km² line-of-sight (LOS)
- Routing table for up to 1000 devices
- Network service management: gateway discovery, alive checking, ARA (improve coexistence), TSSP (avoid overhearing)…
- Upgradeable Over-The-Air (OTA)
- AC adapter: 100-240V AC 50/60Hz to 5V DC 1A
Physical description
- 190x55x32mm
- 185 g
- ABS plastic casing, with IP40 protection for indoor use
- Operating conditions: 0°C to +50°C; 0 to 90% RH, non-condensing
Options
- IP66 casing, dedicated to outdoor installation
- Self-powered 17h.A: up to 5 years of battery life
- Internal antenna
Clover-Sense
Waiting for data on each equipment
Integrated with one or several sensors, it communicates with other Clover-Sense and sends its data to the Clover-Master.
Features
- Multi-band 433MHz, 868MHz, 915MHz
- Transmission: 30mA @ 13 dBm
- Reception: 12 mA @ 126 dBm
- Low-power 32-bit ARM Cortex-M0+
- 12 GPIO, including SPI, I²C, ADC, UART
- Upgradeable bootloader and RTOS
Physical description
- 26x18x4mm
- ~10 grams
- Operating conditions: -20°C to +70°C
- Shielded
Options
- Datalogging: 128 Kb of serial Flash memory
- Configuration: NFC interface