Ineo devices

INS-Gate

Collects and integrates the data to the Cloud

Features

  • Open IoT MQTT over layer
  • Native Three bands implementation (433, 868 and 915Mhz)
  • Wide-area coverage: over 10km² line-of-sight (LOS)
  • Datalogging and buffering in case of Network loss
  • Routing table for up to 1000 devices
  • Ethernet connectivity: RJ45, 10Base-T, or 100Base-TX
  • AC adapter: 100-240V AC 50/60Hz to 5-12V DC 0.2A
  • Low power consumption to fit alternative powering like solar panels
  • Low cost for mass deployment
  • Full 2 way communications
  • Secured by SSL and AES 128
  • Failure and status messages (NTP synchro status, Buffering status…)
  • Time stamped buffering
  • DHCP and fix IP capabilities
  • NTP time synchronization
  • Advanced firmware update mechanism
  • Embedded configuration web server
  • Fully certified CE & EN 300-220 & FCC 15-247

Physical description

  • 135x85x40mm
  • 200g
  • ABS plastic casing with IP44 protection for indoor use
  • Operating conditions: -20°C to +60°C, 0 to 90% RH, non-condensing

Options

  • POE interface
  • Outdoor antenna
  • I/O interface

INS-Extender and INS-Repeater

Relay the data and support the INS-Master

Features

  • Multi-band 433MHz, 868MHz, 915MHz
  • Wide-area coverage: over 10km² line-of-sight (LOS)
  • Routing table for up to 1000 devices
  • Network service management: gateway discovery, alive checking, ARA (improve coexistence), TSSP (avoid overhearing)…
  • Upgradeable Over-The-Air (OTA)
  • AC adapter: 100-240V AC 50/60Hz to 5V DC 1A

Physical description

  • 190x55x32mm
  • 185 g
  • ABS plastic casing, with IP40 protection for indoor use
  • Operating conditions: 0°C to +50°C; 0 to 90% RH, non-condensing

Options

  • IP66 casing, dedicated to outdoor installation
  • Self-powered 17h.A: up to 5 years of battery life
  • Internal antenna

Clover-Sense

Waiting for data on each equipment

Integrated with one or several sensors, it communicates with other Clover-Sense and sends its data to the Clover-Master.

Features

  • Multi-band 433MHz, 868MHz, 915MHz
  • Transmission: 30mA @ 13 dBm
  • Reception: 12 mA @ 126 dBm
  • Low-power 32-bit ARM Cortex-M0+
  • 12 GPIO, including SPI, I²C, ADC, UART
  • Upgradeable bootloader and RTOS

Physical description

  • 26x18x4mm
  • ~10 grams
  • Operating conditions: -20°C to +70°C
  • Shielded

Options

  • Datalogging: 128 Kb of serial Flash memory
  • Configuration: NFC interface